Alfa AWUS036H y drivers backports con soporte hostapd

Hola, despues de seguir las instrucciones, te pego los datos que me solicitaste en el otro post. Realmente no hay errores, o eso creo, lo que hay es como unos mensajes de que hay que borrar algo despues del ultimo comando de compilacion/instalacion.

Te adjunto un log completo de todo lo capturado por consola.

Creo que la cuestion de que algo se me pasa y debo hacer esta en esto…

[code]Note:
You may or may not need to update your initramfs, you should if
any of the modules installed are part of your initramfs. To add
support for your distribution to do this automatically send a
patch against “update-initramfs.sh”. If your distribution does not
require this send a patch with the ‘/usr/bin/lsb_release -i -s’
(“Linux Mint”) tag for your distribution to avoid this warning.

Your backported driver modules should be installed now.
Reboot.

Backports wireless drivers have been installed correctly.
If you want skip reboot please remove the following modules (and also those who use them) : mac80211 cfg80211
If everything is ok you can replug your external wireless device to load the new rtl8187 driver.[/code]

Bueno te dejo todo lo capturado por consola.

[quote]
uname -a
Linux jorge-Notebook 5.3.0-51-generic #44~18.04.2-Ubuntu SMP Thu Apr 23 14:22:51 UTC 2020 i686 i686 i686 GNU/Linux


./build.sh -b

–2020-05-01 19:37:02-- https://mirrors.edge.kernel.org/pub/linux/kernel/projects/backports/stable/v5.4-rc8/backports-5.4-rc8-1.tar.xz
Resolviendo mirrors.edge.kernel.org (mirrors.edge.kernel.org)… 147.75.101.1
Conectando con mirrors.edge.kernel.org (mirrors.edge.kernel.org)[147.75.101.1]:443… conectado.
Petición HTTP enviada, esperando respuesta… 200 OK
Longitud: 6355652 (6,1M) [application/x-xz]
Guardando como: “backports.tar.xz”

backports.tar.xz 100%=====================================================================================>] 6,06M 502KB/s en 9,8s

2020-05-01 19:37:12 (636 KB/s) - “backports.tar.xz” guardado [6355652/6355652]

checking file drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
Hunk #1 succeeded at 1114 (offset 1 line).
Hunk #2 succeeded at 1605 (offset 2 lines).
checking file defconfigs/rtl8187
patching file drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
Hunk #1 succeeded at 1114 (offset 1 line).
Hunk #2 succeeded at 1605 (offset 2 lines).
patching file defconfigs/rtl8187
checking file net/mac80211/cfg.c
Hunk #1 succeeded at 784 (offset 34 lines).
checking file net/mac80211/tx.c
Hunk #1 succeeded at 803 (offset -3 lines).
Hunk #2 succeeded at 2021 (offset 36 lines).
checking file net/wireless/chan.c
Hunk #1 succeeded at 1148 (offset 168 lines).
checking file drivers/net/wireless/zydas/zd1211rw/zd_mac.c
Hunk #1 succeeded at 229 (offset -13 lines).
Hunk #2 succeeded at 1048 (offset -13 lines).
Hunk #3 succeeded at 1392 (offset -13 lines).
checking file drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
Hunk #1 succeeded at 248 (offset -3 lines).
patching file net/mac80211/cfg.c
Hunk #1 succeeded at 784 (offset 34 lines).
patching file net/mac80211/tx.c
Hunk #1 succeeded at 803 (offset -3 lines).
Hunk #2 succeeded at 2021 (offset 36 lines).
patching file net/wireless/chan.c
Hunk #1 succeeded at 1148 (offset 168 lines).
patching file drivers/net/wireless/zydas/zd1211rw/zd_mac.c
Hunk #1 succeeded at 229 (offset -13 lines).
Hunk #2 succeeded at 1048 (offset -13 lines).
Hunk #3 succeeded at 1392 (offset -13 lines).
patching file drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
Hunk #1 succeeded at 248 (offset -3 lines).
Generating local configuration database from kernel … done.
cc -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o conf.o conf.c
lex -ozconf.lex.c -L zconf.l
yacc -ozconf.tab.c -t -l zconf.y
cc -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -c -o zconf.tab.o zconf.tab.c
cc conf.o zconf.tab.o -o conf

configuration written to .config

make[5]: ‘conf’ está actualizado.

configuration written to .config

Building backport-include/backport/autoconf.h … done.
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/compat/main.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/compat/compat.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/main.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/status.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/driver-ops.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/sta_info.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/wep.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/aead_api.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/wpa.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/scan.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/offchannel.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/ht.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/agg-tx.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/agg-rx.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/vht.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/he.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/ibss.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/iface.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/rate.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/michael.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/tkip.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/aes_cmac.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/aes_gmac.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/fils_aead.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/cfg.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/ethtool.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/rx.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/spectmgmt.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/tx.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/key.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/util.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/wme.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/chan.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/trace.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/mlme.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/tdls.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/ocb.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/led.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/debugfs.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/debugfs_sta.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/debugfs_netdev.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/debugfs_key.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/pm.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/rc80211_minstrel.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/rc80211_minstrel_ht.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/rc80211_minstrel_debugfs.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/rc80211_minstrel_ht_debugfs.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/mac80211.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/core.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/sysfs.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/radiotap.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/util.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/reg.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/scan.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/nl80211.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/mlme.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/ibss.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/sme.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/chan.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/ethtool.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/mesh.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/ap.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/trace.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/ocb.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/pmsr.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/debugfs.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/wext-compat.o
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/wext-sme.o
GEN /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/shipped-certs.c
CC [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/shipped-certs.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/cfg80211.o
Building modules, stage 2.
MODPOST 4 modules
CC /home/jorge/backports/backports-rtl8187/tmp/backports/compat/compat.mod.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/compat/compat.ko
CC /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.mod.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko
CC /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/mac80211.mod.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/mac80211.ko
CC /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/cfg80211.mod.o
LD [M] /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/cfg80211.ko

./build.sh -i

[sudo] contraseña para jorge:
Building modules, stage 2.
MODPOST 4 modules
INSTALL /home/jorge/backports/backports-rtl8187/tmp/backports/compat/compat.ko
At main.c:160:

  • SSL error:02001002:system library:fopen:No such file or directory: …/crypto/bio/bss_file.c:72
  • SSL error:2006D080:BIO routines:BIO_new_file:no such file: …/crypto/bio/bss_file.c:79
    sign-file: certs/signing_key.pem: No such file or directory
    INSTALL /home/jorge/backports/backports-rtl8187/tmp/backports/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko
    At main.c:160:
  • SSL error:02001002:system library:fopen:No such file or directory: …/crypto/bio/bss_file.c:72
  • SSL error:2006D080:BIO routines:BIO_new_file:no such file: …/crypto/bio/bss_file.c:79
    sign-file: certs/signing_key.pem: No such file or directory
    INSTALL /home/jorge/backports/backports-rtl8187/tmp/backports/net/mac80211/mac80211.ko
    At main.c:160:
  • SSL error:02001002:system library:fopen:No such file or directory: …/crypto/bio/bss_file.c:72
  • SSL error:2006D080:BIO routines:BIO_new_file:no such file: …/crypto/bio/bss_file.c:79
    sign-file: certs/signing_key.pem: No such file or directory
    INSTALL /home/jorge/backports/backports-rtl8187/tmp/backports/net/wireless/cfg80211.ko
    At main.c:160:
  • SSL error:02001002:system library:fopen:No such file or directory: …/crypto/bio/bss_file.c:72
  • SSL error:2006D080:BIO routines:BIO_new_file:no such file: …/crypto/bio/bss_file.c:79
    sign-file: certs/signing_key.pem: No such file or directory
    DEPMOD 5.3.0-51-generic
    Warning: modules_install: missing ‘System.map’ file. Skipping depmod.
    depmod will prefer updates/ over kernel/ – OK!
    Note:
    You may or may not need to update your initramfs, you should if
    any of the modules installed are part of your initramfs. To add
    support for your distribution to do this automatically send a
    patch against “update-initramfs.sh”. If your distribution does not
    require this send a patch with the ‘/usr/bin/lsb_release -i -s’
    (“Linux Mint”) tag for your distribution to avoid this warning.

Your backported driver modules should be installed now.
Reboot.

Backports wireless drivers have been installed correctly.
If you want skip reboot please remove the following modules (and also those who use them) : mac80211 cfg80211
If everything is ok you can replug your external wireless device to load the new rtl8187 driver.

dmesg

0.000000] Linux version 5.3.0-51-generic (buildd@lgw01-amd64-006) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #44~18.04.2-Ubuntu SMP Thu Apr 23 14:22:51 UTC 2020 (Ubuntu 5.3.0-51.44~18.04.2-generic 5.3.18)
0.000000] KERNEL supported cpus:
0.000000]   Intel GenuineIntel
0.000000]   AMD AuthenticAMD
0.000000]   Hygon HygonGenuine
0.000000]   NSC Geode by NSC
0.000000]   Cyrix CyrixInstead
0.000000]   Centaur CentaurHauls
0.000000]   Transmeta GenuineTMx86
0.000000]   Transmeta TransmetaCPU
0.000000]   UMC UMC UMC UMC
0.000000]   zhaoxin   Shanghai  
0.000000] x86/fpu: x87 FPU will use FXSAVE
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.6 present.
0.000000] DMI: Hewlett-Packard HP G62 Notebook PC              /143A, BIOS F.48 11/09/2011
0.000000] tsc: Fast TSC calibration using PIT
0.000000] tsc: Detected 2261.046 MHz processor
0.003176] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.003178] e820: remove [mem 0x000a0000-0x000fffff] usable
0.003187] last_pfn = 0x158000 max_arch_pfn = 0x1000000
0.003194] MTRR default type: uncachable
0.003195] MTRR fixed ranges enabled:
0.003196]   00000-9FFFF write-back
0.003197]   A0000-BFFFF uncachable
0.003199]   C0000-EFFFF write-through
0.003200]   F0000-FFFFF write-combining
0.003200] MTRR variable ranges enabled:
0.003202]   0 base 000000000 mask F80000000 write-back
0.003203]   1 base 0FFE00000 mask FFFE00000 write-protect
0.003204]   2 base 080000000 mask FE0000000 write-back
0.003205]   3 base 09C000000 mask FFC000000 uncachable
0.003207]   4 base 09B800000 mask FFF800000 uncachable
0.003208]   5 base 100000000 mask F80000000 write-back
0.003209]   6 base 158000000 mask FF8000000 uncachable
0.003210]   7 base 160000000 mask FE0000000 uncachable
0.004007] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
0.012270] check: Scanning 1 areas for low memory corruption
0.012274] initial memory mapped: [mem 0x00000000-0x1c5fffff]
0.012337] BRK [0x1c13a000, 0x1c13afff] PGTABLE
0.012360] BRK [0x1c13b000, 0x1c13bfff] PGTABLE
0.012364] RAMDISK: [mem 0x303b7000-0x341d2fff]
0.012376] ACPI: Early table checksum verification disabled
0.012381] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
0.012386] ACPI: XSDT 0x000000009B7FE120 00007C (v01 HPQOEM SLIC-MPC 00000001      01000013)
0.012393] ACPI: FACP 0x000000009B7FC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012400] ACPI: DSDT 0x000000009B7ED000 00B80E (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012405] ACPI: FACS 0x000000009B75E000 000040
0.012407] ACPI: FACS 0x000000009B75E000 000040
0.012411] ACPI: ASF! 0x000000009B7FD000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012415] ACPI: HPET 0x000000009B7FB000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012419] ACPI: APIC 0x000000009B7FA000 00008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012423] ACPI: MCFG 0x000000009B7F9000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012427] ACPI: SLIC 0x000000009B7EC000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012431] ACPI: BOOT 0x000000009B7E8000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012435] ACPI: ASPT 0x000000009B7E5000 000034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012439] ACPI: WDAT 0x000000009B7E4000 000224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
0.012443] ACPI: SSDT 0x000000009B7E3000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20051117)
0.012447] ACPI: SSDT 0x000000009B7E1000 001AFC (v01 AmdRef AmdTabl  00001000 INTL 20051117)
0.012468] ACPI: Local APIC address 0xfee00000
0.012473] 4618MB HIGHMEM available.
0.012475] 885MB LOWMEM available.
0.012476]   mapped low ram: 0 - 375fe000
0.012476]   low ram: 0 - 375fe000
0.012484] BRK [0x1c13c000, 0x1c13cfff] PGTABLE
0.015452] Zone ranges:
0.015456]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
0.015459]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
0.015460]   HighMem  [mem 0x00000000375fe000-0x0000000157ffffff]
0.015461] Movable zone start for each node
0.015462] Early memory node ranges
0.015463]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
0.015465]   node   0: [mem 0x0000000000100000-0x000000009b63efff]
0.015466]   node   0: [mem 0x000000009b7ff000-0x000000009b7fffff]
0.015467]   node   0: [mem 0x0000000100000000-0x0000000157ffffff]
0.016273] Zeroed struct page in unavailable ranges: 51748 pages
0.016275] Initmem setup node 0 [mem 0x0000000000001000-0x0000000157ffffff]
0.016277] On node 0 totalpages: 996828
0.016279]   DMA zone: 40 pages used for memmap
0.016279]   DMA zone: 0 pages reserved
0.016281]   DMA zone: 3996 pages, LIFO batch:0
0.016359]   Normal zone: 2175 pages used for memmap
0.016360]   Normal zone: 222718 pages, LIFO batch:63
0.020479]   HighMem zone: 770114 pages, LIFO batch:63
0.036223] Using APIC driver default
0.036280] Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff]
0.036478] ACPI: PM-Timer IO Port: 0x408
0.036480] ACPI: Local APIC address 0xfee00000
0.036499] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
0.036502] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.036504] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.036506] ACPI: IRQ0 used by override.
0.036507] ACPI: IRQ9 used by override.
0.036510] Using ACPI (MADT) for SMP configuration information
0.036511] ACPI: HPET id: 0x8086a201 base: 0xfed00000
0.036519] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
0.036542] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
0.036544] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
0.036545] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
0.036545] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
0.036547] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
0.036548] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
0.036549] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
0.036550] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
0.036551] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
0.036552] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
0.036553] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
0.036554] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
0.036554] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
0.036555] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
0.036556] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
0.036557] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
0.036557] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
0.036558] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
0.036559] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
0.036560] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
0.036560] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
0.036561] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
0.036562] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
0.036563] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
0.036565] [mem 0xa0000000-0xefffffff] available for PCI devices
0.036566] Booting paravirtualized kernel on bare hardware
0.036571] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
0.036578] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
0.036825] percpu: Embedded 33 pages/cpu s104460 r0 d30708 u135168
0.036833] pcpu-alloc: s104460 r0 d30708 u135168 alloc=33*4096
0.036834] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
0.036860] Built 1 zonelists, mobility grouping on.  Total pages: 994613
0.036862] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-51-generic root=UUID=46b134cc-980b-4bdf-be43-abfd9e4c50f7 ro quiet splash vt.handoff=1
0.037085] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
0.037128] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
0.037195] microcode: microcode updated early to revision 0x7, date = 2018-04-23
0.037196] Initializing CPU#0
0.037202] mem auto-init: stack:off, heap alloc:on, heap free:off
0.047244] Initializing HighMem for node 0 (000375fe:00158000)
0.198870] Initializing Movable for node 0 (00000000:00000000)
0.201525] Memory: 3784960K/3987312K available (9797K kernel code, 933K rwdata, 3872K rodata, 1152K init, 816K bss, 202352K reserved, 0K cma-reserved, 3080456K highmem)
0.201532] virtual kernel memory layout:
               fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
             cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
               pkmap   : 0xff600000 - 0xff800000   (2048 kB)
               vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
               lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                 .init : 0xdbe61000 - 0xdbf81000   (1152 kB)
                 .data : 0xdb991788 - 0xdbe4b500   (4839 kB)
                 .text : 0xdb000000 - 0xdb991788   (9797 kB)
0.201532] Checking if this processor honours the WP bit even in supervisor mode...Ok.
0.201551] random: get_random_u32 called from __kmem_cache_create+0x31/0x490 with crng_init=0
0.201772] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.201784] Kernel/User page tables isolation: enabled

0.201785] ************************************************************
0.201786] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!  **
0.201786] **                                                        **
0.201787] ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
0.201787] ** Your performance will increase dramatically if you     **
0.201788] ** switch to a 64-bit kernel!                             **
0.201788] **                                                        **
0.201789] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!  **
0.201789] ************************************************************
0.201801] ftrace: allocating 41027 entries in 81 pages
0.225452] rcu: Hierarchical RCU implementation.
0.225455]     Tasks RCU enabled.
0.225456] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
0.229776] NR_IRQS: 2304, nr_irqs: 488, preallocated irqs: 16
0.230178] vt handoff: transparent VT on vt#1
0.230190] Console: colour dummy device 80x25
0.230196] printk: console [tty0] enabled
0.230208] ACPI: Core revision 20190703
0.230360] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
0.230380] APIC: Switch to symmetric I/O mode setup
0.230381] Enabling APIC mode:  Flat.  Using 1 I/O APICs
0.230955] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.250380] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x209776a5be2, max_idle_ns: 440795253840 ns
0.250386] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.09 BogoMIPS (lpj=9044184)
0.250389] pid_max: default: 32768 minimum: 301
0.250436] LSM: Security Framework initializing
0.250449] Yama: becoming mindful.
0.250498] AppArmor: AppArmor initialized
0.250547] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
0.250549] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
0.250762] *** VALIDATE proc ***
0.250829] *** VALIDATE cgroup1 ***
0.250831] *** VALIDATE cgroup2 ***
0.250898] process: using mwait in idle threads
0.250905] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
0.250906] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
0.250910] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
0.250912] Spectre V2 : Mitigation: Full generic retpoline
0.250912] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
0.250913] Spectre V2 : Enabling Restricted Speculation for firmware calls
0.250915] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
0.250915] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
0.250917] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
0.250920] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
0.251145] Freeing SMP alternatives memory: 36K
0.365063] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 350  @ 2.27GHz (family: 0x6, model: 0x25, stepping: 0x5)
0.365186] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
0.365193] core: CPUID marked event: 'bus cycles' unavailable
0.365194] ... version:                3
0.365195] ... bit width:              48
0.365195] ... generic registers:      4
0.365196] ... value mask:             0000ffffffffffff
0.365197] ... max period:             000000007fffffff
0.365198] ... fixed-purpose events:   3
0.365198] ... event mask:             000000070000000f
0.365244] rcu: Hierarchical SRCU implementation.
0.366382] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
0.366382] smp: Bringing up secondary CPUs ...
0.366382] x86: Booting SMP configuration:
0.366382] .... node  #0, CPUs:      #1
0.004288] Initializing CPU#1
0.366519] MDS CPU bug present and SMT on, data leak possible. See [https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html](https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html) for more details.
0.366566]  #2
0.004288] Initializing CPU#2
0.370532]  #3
0.004288] Initializing CPU#3
0.374461] smp: Brought up 1 node, 4 CPUs
0.374461] smpboot: Max logical packages: 2
0.374461] smpboot: Total of 4 processors activated (18088.36 BogoMIPS)
0.377705] allocated 4194304 bytes of page_ext
0.377745] devtmpfs: initialized
0.378508] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
0.378566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
0.378566] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
0.378577] pinctrl core: initialized pinctrl subsystem
0.378655] PM: RTC time: 19:09:45, date: 2020-05-01
0.378777] NET: Registered protocol family 16
0.378931] audit: initializing netlink subsys (disabled)
0.378941] audit: type=2000 audit(1588360185.148:1): state=initialized audit_enabled=0 res=1
0.378941] EISA bus registered
0.378941] cpuidle: using governor ladder
0.378941] cpuidle: using governor menu
0.378941] Simple Boot Flag at 0x44 set to 0x1
0.378941] ACPI: bus type PCI registered
0.378941] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.378941] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
0.378941] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
0.378941] PCI: Using MMCONFIG for extended config space
0.378941] PCI: Using configuration type 1 for base access
0.379918] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
0.382529] ACPI: Added _OSI(Module Device)
0.382530] ACPI: Added _OSI(Processor Device)
0.382532] ACPI: Added _OSI(3.0 _SCP Extensions)
0.382533] ACPI: Added _OSI(Processor Aggregator Device)
0.382534] ACPI: Added _OSI(Linux-Dell-Video)
0.382536] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
0.382537] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
0.394964] ACPI: 3 ACPI AML tables successfully acquired and loaded
0.396307] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
0.396307] ACPI: Dynamic OEM Table Load:
0.396307] ACPI: SSDT 0x00000000EB71E800 0003F0 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
0.396307] ACPI: Dynamic OEM Table Load:
0.396307] ACPI: SSDT 0x00000000EB725000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
0.399561] ACPI: Dynamic OEM Table Load:
0.399567] ACPI: SSDT 0x00000000EB718000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
0.400341] ACPI: Dynamic OEM Table Load:
0.400346] ACPI: SSDT 0x00000000EA81F400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
0.403184] ACPI: EC: EC started
0.403185] ACPI: EC: interrupt blocked
1.273282] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
1.273285] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
1.273286] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
1.273287] ACPI: Interpreter enabled
1.273331] ACPI: (supports S0 S3 S4 S5)
1.273332] ACPI: Using IOAPIC for interrupt routing
1.273373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
1.273601] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
1.273630] ACPI: Enabled 10 GPEs in block 00 to 3F
1.282164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
1.282171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
1.282215] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
1.282821] PCI host bridge to bus 0000:00
1.282824] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
1.282826] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
1.282828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
1.282829] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
1.282831] pci_bus 0000:00: root bus resource [bus 00-7e]
1.282849] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
1.282876] pci 0000:00:00.0: DMAR: Disabling batched IOTLB flush on Ironlake
1.282963] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
1.283010] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
1.283100] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
1.283112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
1.283119] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
1.283123] pci 0000:00:02.0: reg 0x20: [io  0x4050-0x4057]
1.283280] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
1.283315] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
1.283409] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
1.283517] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
1.283544] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
1.283648] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
1.283753] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
1.283787] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
1.283898] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
1.284005] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
1.284132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
1.284247] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
1.284376] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
1.284495] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
1.284522] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
1.284626] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
1.284725] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
1.284900] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
1.285098] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
1.285125] pci 0000:00:1f.2: reg 0x10: [io  0x4048-0x404f]
1.285136] pci 0000:00:1f.2: reg 0x14: [io  0x405c-0x405f]
1.285146] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
1.285157] pci 0000:00:1f.2: reg 0x1c: [io  0x4058-0x405b]
1.285168] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
1.285179] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
1.285241] pci 0000:00:1f.2: PME# supported from D3hot
1.285333] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
1.285361] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
1.285390] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
1.285562] pci 0000:01:00.0: [1002:68e0] type 00 class 0x030000
1.285588] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
1.285601] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
1.285608] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
1.285622] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
1.285629] pci 0000:01:00.0: enabling Extended Tags
1.285681] pci 0000:01:00.0: supports D1 D2
1.285700] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
1.285789] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
1.285816] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
1.285865] pci 0000:01:00.1: enabling Extended Tags
1.285913] pci 0000:01:00.1: supports D1 D2
1.286001] pci 0000:00:01.0: PCI bridge to [bus 01]
1.286004] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
1.286007] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
1.286010] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
1.286279] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
1.286626] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
1.286741] pci 0000:02:00.0: reg 0x18: [mem 0xc0410000-0xc0410fff 64bit pref]
1.286811] pci 0000:02:00.0: reg 0x20: [mem 0xc0400000-0xc040ffff 64bit pref]
1.286857] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
1.287211] pci 0000:02:00.0: supports D1 D2
1.287213] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1.287574] pci 0000:00:1c.0: PCI bridge to [bus 02]
1.287579] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
1.287583] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
1.287591] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
1.287726] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
1.287802] pci 0000:03:00.0: reg 0x10: [mem 0xc2400000-0xc2403fff 64bit]
1.287928] pci 0000:03:00.0: enabling Extended Tags
1.288110] pci 0000:03:00.0: supports D1 D2
1.288324] pci 0000:00:1c.2: PCI bridge to [bus 03]
1.288328] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
1.288333] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff]
1.288340] pci 0000:00:1c.2:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
1.288365] pci_bus 0000:04: extended config space not accessible
1.288425] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
1.288438] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
1.288439] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
1.288441] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
1.288442] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff window] (subtractive decode)
1.288467] pci_bus 0000:00: on NUMA node 0
1.288975] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
1.289042] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
1.289107] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
1.289172] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
1.289236] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
1.289301] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
1.289368] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
1.289433] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
1.323232] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
1.323236] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
1.323319] PCI host bridge to bus 0000:7f
1.323321] pci_bus 0000:7f: root bus resource [bus 7f]
1.323329] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
1.323383] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
1.323442] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
1.323493] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
1.323542] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
1.323592] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
1.323651] pci_bus 0000:7f: on NUMA node 0
1.323778] ACPI: EC: interrupt unblocked
1.323789] ACPI: EC: event unblocked
1.323798] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
1.323800] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
1.323883] SCSI subsystem initialized
1.323883] libata version 3.00 loaded.
1.323883] pci 0000:00:02.0: vgaarb: setting as boot VGA device
1.323883] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
1.323883] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
1.323883] pci 0000:00:02.0: vgaarb: no bridge control possible
1.323883] pci 0000:01:00.0: vgaarb: bridge control possible
1.323883] vgaarb: loaded
1.323883] ACPI: bus type USB registered
1.323883] usbcore: registered new interface driver usbfs
1.323883] usbcore: registered new interface driver hub
1.323883] usbcore: registered new device driver usb
1.323883] pps_core: LinuxPPS API ver. 1 registered
1.323883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
1.323883] PTP clock support registered
1.323883] EDAC MC: Ver: 3.0.0
1.323883] PCI: Using ACPI for IRQ routing
1.331068] PCI: pci_cache_line_size set to 64 bytes
1.331161] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
1.331163] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
1.331165] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
1.331310] NetLabel: Initializing
1.331311] NetLabel:  domain hash size = 128
1.331312] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
1.331329] NetLabel:  unlabeled traffic allowed by default
1.331535] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
1.331541] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
1.334424] clocksource: Switched to clocksource tsc-early
1.352271] VFS: Disk quotas dquot_6.6.0
1.352297] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
1.352331] *** VALIDATE hugetlbfs ***
1.352445] AppArmor: AppArmor Filesystem Enabled
1.352487] pnp: PnP ACPI init
1.352722] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x1fff]
1.352779] system 00:00: [io  0x0680-0x069f] has been reserved
1.352781] system 00:00: [io  0x0800-0x080f] has been reserved
1.352783] system 00:00: [io  0x0810-0x0813] has been reserved
1.352785] system 00:00: [io  0xffff] has been reserved
1.352787] system 00:00: [io  0x0400-0x047f] has been reserved
1.352789] system 00:00: [io  0x0500-0x057f] has been reserved
1.352796] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
1.352829] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
1.352857] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
1.352883] pnp 00:03: Plug and Play ACPI device, IDs SYN1e25 SYN1e00 SYN0002 PNP0f13 (active)
1.353239] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
1.353241] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
1.353243] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
1.353245] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
1.353247] system 00:04: [mem 0xf0000000-0xf1ffffff] has been reserved
1.353249] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
1.353251] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
1.353253] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
1.353255] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
1.353257] system 00:04: [mem 0xc4600000-0xc4600fff] has been reserved
1.353262] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
1.384230] pnp: PnP ACPI: found 5 devices
1.384233] PnPBIOS: Disabled by ACPI PNP
1.386757] thermal_sys: Registered thermal governor 'fair_share'
1.386758] thermal_sys: Registered thermal governor 'bang_bang'
1.386759] thermal_sys: Registered thermal governor 'step_wise'
1.386759] thermal_sys: Registered thermal governor 'user_space'
1.386760] thermal_sys: Registered thermal governor 'power_allocator'
1.421280] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
1.421327] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
1.421329] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
1.421345] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
1.421348] pci 0000:00:01.0: PCI bridge to [bus 01]
1.421351] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
1.421354] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
1.421357] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
1.421362] pci 0000:02:00.0: BAR 6: assigned [mem 0xc3400000-0xc341ffff pref]
1.421363] pci 0000:00:1c.0: PCI bridge to [bus 02]
1.421366] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
1.421372] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
1.421377] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
1.421384] pci 0000:00:1c.2: PCI bridge to [bus 03]
1.421387] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
1.421393] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff]
1.421397] pci 0000:00:1c.2:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
1.421405] pci 0000:00:1e.0: PCI bridge to [bus 04]
1.421421] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
1.421422] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
1.421424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
1.421426] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
1.421427] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
1.421429] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
1.421430] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
1.421432] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
1.421433] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
1.421435] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
1.421437] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
1.421438] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
1.421439] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
1.421441] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
1.421443] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
1.421444] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
1.421446] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff window]
1.421548] NET: Registered protocol family 2
1.421747] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
1.421757] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
1.421781] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
1.421796] TCP: Hash tables configured (established 8192 bind 8192)
1.421837] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
1.421844] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
1.421900] NET: Registered protocol family 1
1.421908] NET: Registered protocol family 44
1.421938] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
1.422652] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
1.422707] PCI: CLS 64 bytes, default 64
1.422809] Trying to unpack rootfs image as initramfs...
2.690758] Freeing initrd memory: 63600K
2.690785] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
2.690788] software IO TLB: mapped [mem 0x2b9b7000-0x2f9b7000] (64MB)
2.691015] check: Scanning for low memory corruption every 60 seconds
2.693214] Initialise system trusted keyrings
2.693227] Key type blacklist registered
2.693266] workingset: timestamp_bits=14 max_order=20 bucket_order=6
2.695039] zbud: loaded
2.695477] squashfs: version 4.0 (2009/01/31) Phillip Lougher
2.695690] fuse: init (API version 7.31)
2.695843] Platform Keyring initialized
2.704207] Key type asymmetric registered
2.704209] Asymmetric key parser 'x509' registered
2.704257] bounce: pool size: 64 pages
2.704272] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
2.704321] io scheduler mq-deadline registered
2.705209] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
2.705290] vesafb: mode is 1024x768x32, linelength=4096, pages=0
2.705291] vesafb: scrolling: redraw
2.705293] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
2.705315] vesafb: framebuffer at 0xb0000000, mapped to 0x(ptrval), using 3072k, total 3072k
2.705372] fbcon: Deferring console take-over
2.705373] fb0: VESA VGA frame buffer device
2.705390] intel_idle: MWAIT substates: 0x1120
2.705391] intel_idle: v0.4.1 model 0x25
2.705616] intel_idle: lapic_timer_reliable_states 0xffffffff
2.707121] ACPI: AC Adapter [ADP1] (off-line)
2.707197] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
2.707206] ACPI: Lid Switch [LID0]
2.707243] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
2.707252] ACPI: Power Button [PWRB]
2.707290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
2.707308] ACPI: Power Button [PWRF]
2.725214] thermal LNXTHERM:00: registered as thermal_zone0
2.725217] ACPI: Thermal Zone [TSZ0] (0 C)
2.725393] isapnp: Scanning for PnP cards...
2.725576] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
2.729131] Linux agpgart interface v0.103
2.734198] loop: module loaded
2.734580] libphy: Fixed MDIO Bus: probed
2.734582] tun: Universal TUN/TAP device driver, 1.6
2.734657] PPP generic driver version 2.4.2
2.734748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2.734753] ehci-pci: EHCI PCI platform driver
2.734970] ehci-pci 0000:00:1a.0: EHCI Host Controller
2.734978] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
2.734995] ehci-pci 0000:00:1a.0: debug port 2
2.738932] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
2.738952] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
2.754439] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
2.754510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
2.754513] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.754515] usb usb1: Product: EHCI Host Controller
2.754517] usb usb1: Manufacturer: Linux 5.3.0-51-generic ehci_hcd
2.754519] usb usb1: SerialNumber: 0000:00:1a.0
2.754731] hub 1-0:1.0: USB hub found
2.754741] hub 1-0:1.0: 3 ports detected
2.755105] ehci-pci 0000:00:1d.0: EHCI Host Controller
2.755111] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
2.755125] ehci-pci 0000:00:1d.0: debug port 2
2.759040] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
2.759056] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc4509000
2.774439] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
2.774505] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
2.774507] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.774509] usb usb2: Product: EHCI Host Controller
2.774511] usb usb2: Manufacturer: Linux 5.3.0-51-generic ehci_hcd
2.774513] usb usb2: SerialNumber: 0000:00:1d.0
2.774706] hub 2-0:1.0: USB hub found
2.774714] hub 2-0:1.0: 3 ports detected
2.774920] ehci-platform: EHCI generic platform driver
2.774935] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
2.774939] ohci-pci: OHCI PCI platform driver
2.774952] ohci-platform: OHCI generic platform driver
2.774961] uhci_hcd: USB Universal Host Controller Interface driver
2.775045] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
2.786917] i8042: Detected active multiplexing controller, rev 1.1
2.792423] serio: i8042 KBD port at 0x60,0x64 irq 1
2.792430] serio: i8042 AUX0 port at 0x60,0x64 irq 12
2.792474] serio: i8042 AUX1 port at 0x60,0x64 irq 12
2.792508] serio: i8042 AUX2 port at 0x60,0x64 irq 12
2.792543] serio: i8042 AUX3 port at 0x60,0x64 irq 12
2.792766] mousedev: PS/2 mouse device common for all mice
2.793123] rtc_cmos 00:01: RTC can wake from S4
2.793364] rtc_cmos 00:01: registered as rtc0
2.793397] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
2.793406] i2c /dev entries driver
2.793467] device-mapper: uevent: version 1.0.3
2.793593] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
2.793621] platform eisa.0: Probing EISA bus 0
2.793623] platform eisa.0: EISA: Cannot allocate resource for mainboard
2.793626] platform eisa.0: Cannot allocate resource for EISA slot 1
2.793628] platform eisa.0: Cannot allocate resource for EISA slot 2
2.793630] platform eisa.0: Cannot allocate resource for EISA slot 3
2.793632] platform eisa.0: Cannot allocate resource for EISA slot 4
2.793634] platform eisa.0: Cannot allocate resource for EISA slot 5
2.793636] platform eisa.0: Cannot allocate resource for EISA slot 6
2.793638] platform eisa.0: Cannot allocate resource for EISA slot 7
2.793640] platform eisa.0: Cannot allocate resource for EISA slot 8
2.793642] platform eisa.0: EISA: Detected 0 cards
2.793648] cpufreq_nforce2: No nForce2 chipset
2.793649] intel_pstate: CPU model not supported
2.797679] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
2.825973] ledtrig-cpu: registered to indicate activity on CPUs
2.826357] NET: Registered protocol family 10
2.835465] Segment Routing with IPv6
2.835501] NET: Registered protocol family 17
2.835549] Key type dns_resolver registered
2.869897] microcode: sig=0x20655, pf=0x10, revision=0x7
2.869960] microcode: Microcode Update Driver: v2.2.
2.869966] Using IPI No-Shortcut mode
2.869974] sched_clock: Marking stable (2869664729, 288390)->(2904817716, -34864597)
2.870166] registered taskstats version 1
2.870179] Loading compiled-in X.509 certificates
2.875245] Loaded X.509 cert 'Build time autogenerated kernel key: 2d6982fd1d30bcc04290d5038dbf692b47ba85c9'
2.875289] zswap: loaded using pool lzo/zbud
2.883205] Key type big_key registered
2.887284] Key type encrypted registered
2.887288] AppArmor: AppArmor sha1 policy hashing enabled
2.887295] ima: No TPM chip found, activating TPM-bypass!
2.887301] ima: Allocated hash algorithm: sha1
2.887312] No architecture policies found
2.887326] evm: Initialising EVM extended attributes:
2.887328] evm: security.selinux
2.887329] evm: security.SMACK64
2.887331] evm: security.SMACK64EXEC
2.887332] evm: security.SMACK64TRANSMUTE
2.887333] evm: security.SMACK64MMAP
2.887335] evm: security.apparmor
2.887336] evm: security.ima
2.887338] evm: security.capability
2.887340] evm: HMAC attrs: 0x1
2.887716] PM:   Magic number: 4:699:191
2.887792] acpi device:1d: hash matches
2.887858] rtc_cmos 00:01: setting system clock to 2020-05-01T19:09:48 UTC (1588360188)
2.888182] battery: ACPI: Battery Slot [BAT0] (battery present)
3.044030] isapnp: No Plug & Play device found
3.046453] Freeing unused kernel image memory: 1152K
3.070624] Write protecting kernel text and read-only data: 13704k
3.070625] NX-protecting the kernel data: 6584k
3.071092] x86/mm: Checked W+X mappings: passed, no W+X pages found.
3.071145] x86/mm: Checking user space page tables
3.071218] x86/mm: Checked W+X mappings: passed, no W+X pages found.
3.071219] Run /init as init process
3.090412] usb 1-1: new high-speed USB device number 2 using ehci-pci
3.114409] usb 2-1: new high-speed USB device number 2 using ehci-pci
3.118874] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
3.118878] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
3.119174] hub 1-1:1.0: USB hub found
3.119240] hub 1-1:1.0: 6 ports detected
3.146885] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
3.146889] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
3.147172] hub 2-1:1.0: USB hub found
3.147244] hub 2-1:1.0: 8 ports detected
3.251663] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
3.263796] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
3.274617] libphy: r8169: probed
3.274865] r8169 0000:02:00.0 eth0: RTL8102e/RTL8103e, 3c:4a:92:01:7c:f2, XID 24e, IRQ 16
3.279956] bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
3.279999] bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
3.280033] bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
3.280105] bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
3.286707] ahci 0000:00:1f.2: version 3.0
3.287050] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
3.287054] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
3.293025] bcma-pci-bridge 0000:03:00.0: bus0: Bus registered
3.299057] scsi host0: ahci
3.299737] scsi host1: ahci
3.299898] scsi host2: ahci
3.303012] scsi host3: ahci
3.303089] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 27
3.303092] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 27
3.303093] ata3: DUMMY
3.303093] ata4: DUMMY
3.326411] r8169 0000:02:00.0 enp2s0: renamed from eth0
3.404305] [drm] radeon kernel modesetting enabled.
3.404343] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
3.404437] ATPX version 1, functions 0x000000bf
3.404538] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xa0000000 -> 0xafffffff
3.404540] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xc4400000 -> 0xc441ffff
3.404542] checking generic (b0000000 300000) vs hw (a0000000 10000000)
3.404544] checking generic (b0000000 300000) vs hw (c4400000 20000)
3.404593] radeon 0000:01:00.0: enabling device (0000 -> 0003)
3.404905] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x143A 0x00).
3.410444] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
3.414772] pci 0000:00:00.0: Intel HD Graphics Chipset
3.414794] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
3.415300] pci 0000:00:00.0: detected 32768K stolen memory
3.415426] checking generic (b0000000 300000) vs hw (b0000000 10000000)
3.415428] fb0: switching to inteldrmfb from VESA VGA
3.415592] i915 0000:00:02.0: vgaarb: deactivate vga console
3.444918] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
3.444919] [drm] Driver supports precise vblank timestamp query.
3.458411] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b1aa, bcdDevice=59.53
3.458413] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3.458415] usb 1-1.3: Product: HP Webcam-101
3.458416] usb 1-1.3: Manufacturer: Chicony Corp.
3.460524] vga_switcheroo: enabled
3.467140] ATOM BIOS: HP
3.467213] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
3.467216] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
3.467223] [drm] Detected VRAM RAM=1024M, BAR=256M
3.467224] [drm] RAM width 64bits DDR
3.467299] [TTM] Zone  kernel: Available graphics memory: 384646 KiB
3.467300] [TTM] Zone highmem: Available graphics memory: 1924874 KiB
3.467302] [TTM] Initializing pool allocator
3.467313] [TTM] Initializing DMA pool allocator
3.467343] [drm] radeon: 1024M of VRAM memory ready
3.467344] [drm] radeon: 1024M of GTT memory ready.
3.467357] [drm] Loading CEDAR Microcode
3.467488] [drm] Internal thermal controller with fan control
3.467511] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
3.467515] radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
3.471522] [drm] radeon: dpm initialized
3.471631] [drm] GART: num cpu pages 262144, num gpu pages 262144
3.479226] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
3.479358] radeon 0000:01:00.0: WB enabled
3.479362] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(ptrval)
3.479364] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(ptrval)
3.479738] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(ptrval)
3.479741] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
3.479741] [drm] Driver supports precise vblank timestamp query.
3.479743] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
3.479800] radeon 0000:01:00.0: radeon: using MSI.
3.479832] [drm] radeon: irq initialized.
3.496759] [drm] ring test on 0 succeeded in 1 usecs
3.496766] [drm] ring test on 3 succeeded in 3 usecs
3.500009] [drm] RC6 disabled, disabling runtime PM support
3.616668] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
3.617727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
3.618946] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
3.618949] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
3.619546] ata2.00: ATAPI: hp      DVD RW AD-7701H, 2.86, max UDMA/100
3.621323] ata1.00: configured for UDMA/100
3.626261] ata2.00: configured for UDMA/100
3.673091] [drm] ring test on 5 succeeded in 1 usecs
3.673096] [drm] UVD initialized successfully.
3.673391] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-6 1A12 PQ: 0 ANSI: 5
3.673530] [drm] ib test on ring 0 succeeded in 0 usecs
3.673587] [drm] ib test on ring 3 succeeded in 0 usecs
3.673804] sd 0:0:0:0: Attached scsi generic sg0 type 0
3.673818] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
3.673836] sd 0:0:0:0: [sda] Write Protect is off
3.673839] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
3.673866] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
3.684691] scsi 1:0:0:0: CD-ROM            hp       DVD RW AD-7701H  2.86 PQ: 0 ANSI: 5
3.714399] tsc: Refined TSC clocksource calibration: 2260.999 MHz
3.714432] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20974a4d8bb, max_idle_ns: 440795246623 ns
3.823828] clocksource: Switched to clocksource tsc
3.823831]  sda: sda1 sda2 sda3 < sda5 >
3.823890] [drm] ib test on ring 5 succeeded
3.824511] sd 0:0:0:0: [sda] Attached SCSI disk
3.886533] [drm] radeon atom DIG backlight initialized
3.886536] [drm] Radeon Display Connectors
3.886538] [drm] Connector 0:
3.886539] [drm]   LVDS-2
3.886541] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
3.886542] [drm]   Encoders:
3.886543] [drm]     LCD1: INTERNAL_UNIPHY
3.886545] [drm] Connector 1:
3.886545] [drm]   HDMI-A-1
3.886546] [drm]   HPD1
3.886548] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
3.886549] [drm]   Encoders:
3.886550] [drm]     DFP1: INTERNAL_UNIPHY1
3.886551] [drm] Connector 2:
3.886552] [drm]   VGA-2
3.886553] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
3.886554] [drm]   Encoders:
3.886555] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
3.889869] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
3.889872] cdrom: Uniform CD-ROM driver Revision: 3.20
3.890365] sr 1:0:0:0: Attached scsi CD-ROM sr0
3.890478] sr 1:0:0:0: Attached scsi generic sg1 type 5
4.018846] [drm] Cannot find any crtc or sizes
4.023202] random: fast init done
4.079056] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
4.079225] random: systemd-udevd: uninitialized urandom read (16 bytes read)
4.079279] random: systemd-udevd: uninitialized urandom read (16 bytes read)
4.079287] random: systemd-udevd: uninitialized urandom read (16 bytes read)
4.079402] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 1
4.083464] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
4.084424] acpi device:01: registered as cooling_device4
4.084554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
4.084683] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
4.085347] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
4.086064] acpi device:0a: registered as cooling_device5
4.086130] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input13
4.086681] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
4.099544] fbcon: i915drmfb (fb0) is primary device
4.099546] fbcon: Deferring console take-over
4.099551] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
4.513950] psmouse serio2: synaptics: queried max coordinates: x ..5888], y ..4844]
4.583249] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0xa0400/0x0, board id: 0, fw id: 639099
4.627585] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
5.114847] [drm] Cannot find any crtc or sizes
5.170445] raid6: sse2x2   gen()  6244 MB/s
5.218439] raid6: sse2x2   xor()  5049 MB/s
5.266446] raid6: sse2x1   gen()  5220 MB/s
5.314396] raid6: sse2x1   xor()  4270 MB/s
5.362438] raid6: sse1x2   gen()  3134 MB/s
5.410452] raid6: sse1x1   gen()  2634 MB/s
5.410453] raid6: using algorithm sse2x2 gen() 6244 MB/s
5.410454] raid6: .... xor() 5049 MB/s, rmw enabled
5.410455] raid6: using ssse3x1 recovery algorithm
5.423278] xor: measuring software checksum speed
5.462435]    pIII_sse  :  9912.000 MB/sec
5.502432]    prefetch64-sse: 11447.000 MB/sec
5.502434] xor: using function: prefetch64-sse (11447.000 MB/sec)
5.554672] Btrfs loaded, crc32c=crc32c-intel
5.829701] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
7.046636] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
7.567913] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
7.586703] systemd[1]: Detected architecture x86.
7.596878] systemd[1]: Set hostname to <jorge-Notebook>.
8.055388] random: crng init done
8.055394] random: 7 urandom warning(s) missed due to ratelimiting
9.974027] systemd[1]: Reached target User and Group Name Lookups.
9.974410] systemd[1]: Created slice User and Session Slice.
9.974682] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
9.974715] systemd[1]: Reached target System Time Synchronized.
9.974732] systemd[1]: Reached target Remote File Systems.
9.974813] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
9.975049] systemd[1]: Created slice System Slice.

10.613526] lp: driver loaded but no devices found
10.621361] ppdev: user-space parallel port driver
10.699809] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
10.912106] systemd-journald[459]: Received request to flush runtime journal from PID 1
11.270467] Adding 1811976k swap on /swapfile. Priority:-2 extents:5 across:1844744k FS
13.351142] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
13.351237] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-213)
13.351245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
13.351249] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_SB.PCI0.P0P2.PEGP.GPIO) (20190703/utaddress-213)
13.351255] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_GPE.GPIO) (20190703/utaddress-213)
13.351259] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213)
13.351264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
13.351266] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_SB.PCI0.P0P2.PEGP.GPIO) (20190703/utaddress-213)
13.351270] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_GPE.GPIO) (20190703/utaddress-213)
13.351274] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213)
13.351278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
13.351279] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_SB.PCI0.P0P2.PEGP.GPIO) (20190703/utaddress-213)
13.351283] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_GPE.GPIO) (20190703/utaddress-213)
13.351287] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213)
13.351291] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
13.351292] lpc_ich: Resource conflict(s) found affecting gpio_ich
13.845221] input: HP WMI hotkeys as /devices/virtual/input/input18
14.050276] kvm: disabled by bios
14.088667] kvm: disabled by bios
14.124740] kvm: disabled by bios
14.206088] kvm: disabled by bios
14.206244] cfg80211: Loading compiled-in X.509 certificates for regulatory database
14.211253] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
14.416763] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
14.417113] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
14.619291] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
15.129537] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
15.129548] b43: probe of bcma0:1 failed with error -524
15.129569] Broadcom 43xx driver loaded Features: PNL ]
15.526413] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
15.536787] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 18
15.538069] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’
15.538580] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
15.588921] brcmsmac bcma0:1 wlp3s0b1: renamed from wlan0
15.638256] usb 2-1.1: New USB device found, idVendor=0101, idProduct=0007, bcdDevice= 1.00
15.638259] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
15.638261] usb 2-1.1: Product: USB OPTICAL MOUSE
15.696803] hidraw: raw HID events driver (C) Jiri Kosina
15.748264] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
15.748268] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
15.748272] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
15.748274] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
15.748275] snd_hda_codec_realtek hdaudioC0D0: inputs:
15.748279] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
15.748281] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
15.753860] mc: Linux media interface: v0.10
15.798548] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
15.798660] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
15.827814] usbcore: registered new interface driver usbhid
15.827816] usbhid: USB HID core driver
15.837181] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0101:0007.0001/input/input22
15.837369] hid-generic 0003:0101:0007.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.1/input0
15.910850] videodev: Linux video capture interface: v2.00
16.598575] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b1aa)
16.602317] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
16.602324] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
16.602326] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
16.602433] input: HP Webcam-101: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input23
16.602516] usbcore: registered new interface driver uvcvideo
16.602517] USB Video Class driver (1.1.1)
17.082567] audit: type=1400 audit(1588353002.690:2): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/bin/man” pid=753 comm=“apparmor_parser”
17.082574] audit: type=1400 audit(1588353002.690:3): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“man_filter” pid=753 comm=“apparmor_parser”
17.082578] audit: type=1400 audit(1588353002.690:4): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“man_groff” pid=753 comm=“apparmor_parser”
17.086679] audit: type=1400 audit(1588353002.694:5): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/sbin/dhclient” pid=750 comm=“apparmor_parser”
17.086684] audit: type=1400 audit(1588353002.694:6): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/lib/NetworkManager/nm-dhcp-client.action” pid=750 comm=“apparmor_parser”
17.086687] audit: type=1400 audit(1588353002.694:7): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/lib/NetworkManager/nm-dhcp-helper” pid=750 comm=“apparmor_parser”
17.086690] audit: type=1400 audit(1588353002.694:8): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/lib/connman/scripts/dhclient-script” pid=750 comm=“apparmor_parser”
17.089302] audit: type=1400 audit(1588353002.694:9): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/lib/lightdm/lightdm-guest-session” pid=749 comm=“apparmor_parser”
17.089307] audit: type=1400 audit(1588353002.694:10): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“/usr/lib/lightdm/lightdm-guest-session//chromium” pid=749 comm=“apparmor_parser”
17.094863] audit: type=1400 audit(1588353002.702:11): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“libreoffice-oopslash” pid=754 comm=“apparmor_parser”
27.006802] kauditd_printk_skb: 18 callbacks suppressed
27.006804] audit: type=1400 audit(1588353012.614:30): apparmor=“DENIED” operation=“open” profile=“/usr/sbin/ntpd” name=“/snap/bin/” pid=1054 comm=“ntpd” requested_mask=“r” denied_mask=“r” fsuid=0 ouid=0
28.337308] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
28.337429] radeon 0000:01:00.0: WB enabled
28.337434] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x7195c9e7
28.337436] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xde4a2fab
28.337809] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x32c3a370
28.354471] [drm] ring test on 0 succeeded in 1 usecs
28.354479] [drm] ring test on 3 succeeded in 3 usecs
28.474220] fbcon: Taking over console
28.482297] Console: switching to colour frame buffer device 170x48
28.530784] [drm] ring test on 5 succeeded in 1 usecs
28.530790] [drm] UVD initialized successfully.
28.530849] [drm] ib test on ring 0 succeeded in 0 usecs
28.530934] [drm] ib test on ring 3 succeeded in 0 usecs
28.537908] RTL8201CP Ethernet r8169-200:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
28.647474] r8169 0000:02:00.0 enp2s0: Link is Down
28.681254] [drm] ib test on ring 5 succeeded
28.966578] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
28.966664] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
30.276252] wlp3s0b1: authenticate with 70:4f:57:62:3b:a3
30.278137] wlp3s0b1: send auth to 70:4f:57:62:3b:a3 (try 1/3)
30.279711] wlp3s0b1: authenticated
30.282361] wlp3s0b1: associate with 70:4f:57:62:3b:a3 (try 1/3)
30.303013] wlp3s0b1: RX AssocResp from 70:4f:57:62:3b:a3 (capab=0xc11 status=0 aid=9)
30.303661] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
30.303789] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
30.303915] wlp3s0b1: associated
30.404351] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
30.411832] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504
30.616964] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0b1: link becomes ready
31.604362] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
31.799577] audit: type=1400 audit(1588353017.406:31): apparmor=“DENIED” operation=“open” profile=“system_tor” name=“/etc/ssl/openssl.cnf” pid=1152 comm=“tor” requested_mask=“r” denied_mask=“r” fsuid=124 ouid=0
36.125259] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
47.788051] audit: type=1400 audit(1588353033.395:32): apparmor=“DENIED” operation=“open” profile=“/usr/sbin/ntpd” name=“/snap/bin/” pid=1388 comm=“ntpd” requested_mask=“r” denied_mask=“r” fsuid=0 ouid=0
57.452178] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
57.452309] radeon 0000:01:00.0: WB enabled
57.452315] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x7195c9e7
57.452317] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xde4a2fab
57.452693] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x32c3a370
57.469553] [drm] ring test on 0 succeeded in 1 usecs
57.469560] [drm] ring test on 3 succeeded in 3 usecs
57.646445] [drm] ring test on 5 succeeded in 1 usecs
57.646454] [drm] UVD initialized successfully.
57.646515] [drm] ib test on ring 0 succeeded in 0 usecs
57.646627] [drm] ib test on ring 3 succeeded in 0 usecs
57.797419] [drm] ib test on ring 5 succeeded
389.349141] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
389.349259] radeon 0000:01:00.0: WB enabled
389.349265] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x7195c9e7
389.349268] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xde4a2fab
389.349668] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x32c3a370
389.366269] [drm] ring test on 0 succeeded in 1 usecs
389.366278] [drm] ring test on 3 succeeded in 3 usecs
389.542669] [drm] ring test on 5 succeeded in 1 usecs
389.542675] [drm] UVD initialized successfully.
389.542732] [drm] ib test on ring 0 succeeded in 0 usecs
389.542794] [drm] ib test on ring 3 succeeded in 0 usecs
389.693128] [drm] ib test on ring 5 succeeded
430.733158] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
501.720862] perf: interrupt took too long (3155 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
610.563266] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
610.563400] radeon 0000:01:00.0: WB enabled
610.563407] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x7195c9e7
610.563411] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xde4a2fab
610.563817] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x32c3a370
610.580614] [drm] ring test on 0 succeeded in 1 usecs
610.580622] [drm] ring test on 3 succeeded in 3 usecs
610.756925] [drm] ring test on 5 succeeded in 1 usecs
610.756932] [drm] UVD initialized successfully.
610.756987] [drm] ib test on ring 0 succeeded in 0 usecs
610.757096] [drm] ib test on ring 3 succeeded in 0 usecs
610.907847] [drm] ib test on ring 5 succeeded
798.348646] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
798.348778] radeon 0000:01:00.0: WB enabled
798.348783] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x7195c9e7
798.348786] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xde4a2fab
798.349162] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x32c3a370
798.365837] [drm] ring test on 0 succeeded in 1 usecs
798.365845] [drm] ring test on 3 succeeded in 3 usecs
798.542222] [drm] ring test on 5 succeeded in 1 usecs
798.542228] [drm] UVD initialized successfully.
798.542284] [drm] ib test on ring 0 succeeded in 0 usecs
798.542406] [drm] ib test on ring 3 succeeded in 0 usecs
798.703884] [drm] ib test on ring 5 succeeded
1447.560580] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
1447.560725] radeon 0000:01:00.0: WB enabled
1447.560733] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x7195c9e7
1447.560738] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xde4a2fab
1447.561119] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x32c3a370
1447.577970] [drm] ring test on 0 succeeded in 1 usecs
1447.577981] [drm] ring test on 3 succeeded in 3 usecs
1447.754436] [drm] ring test on 5 succeeded in 1 usecs
1447.754442] [drm] UVD initialized successfully.
1447.754495] [drm] ib test on ring 0 succeeded in 0 usecs
1447.754595] [drm] ib test on ring 3 succeeded in 0 usecs
1447.905512] [drm] ib test on ring 5 succeeded
1469.649979] perf: interrupt took too long (3953 > 3943), lowering kernel.perf_event_max_sample_rate to 50500
1918.062683] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
1918.100033] usb 2-1.2: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
1918.100036] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1918.100039] usb 2-1.2: Product: Mass Storage
1918.100041] usb 2-1.2: Manufacturer: Generic
1918.100044] usb 2-1.2: SerialNumber: 3A24D819
1918.288451] usb-storage 2-1.2:1.0: USB Mass Storage device detected
1918.288859] scsi host4: usb-storage 2-1.2:1.0
1918.288998] usbcore: registered new interface driver usb-storage
1918.309714] usbcore: registered new interface driver uas
1919.296930] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
1919.297552] sd 4:0:0:0: Attached scsi generic sg2 type 0
1919.300745] sd 4:0:0:0: [sdb] 59392000 512-byte logical blocks: (30.4 GB/28.3 GiB)
1919.302048] sd 4:0:0:0: [sdb] Write Protect is off
1919.302054] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
1919.303253] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
1919.310747] sdb: sdb1
1919.316238] sd 4:0:0:0: [sdb] Attached SCSI removable disk
2059.285862] perf: interrupt took too long (4954 > 4941), lowering kernel.perf_event_max_sample_rate to 40250[/quote]

Ahora no arranca el equipo, cuando le doy a reiniciar se queda con la pantalla de inicio de Linux mint.

Ahora tengo que entrar en modo recovery para restaurar el equipo con Timeshift.

No sale nada sobre el wifi USB… No sale tampoco nada realmente hororifico en el dmesg para explicar tus problemas… He probado antes de mi lado blacklisteando los módulos indicados pero - no sé porque - se me vuelven a activar y tengo a los dos drivers activados juntos. Me funciona pero sin compatibilidad hostapd… Menudo lio con estos drivers :stuck_out_tongue:

[quote]Note:
You may or may not need to update your initramfs, you should if
any of the modules installed are part of your initramfs. To add
support for your distribution to do this automatically send a
patch against “update-initramfs.sh”. If your distribution does not
require this send a patch with the ‘/usr/bin/lsb_release -i -s’
(“Linux Mint”) tag for your distribution to avoid this warning.

Your backported driver modules should be installed now.
Reboot.

Backports wireless drivers have been installed correctly.
If you want skip reboot please remove the following modules (and also those who use them) : mac80211 cfg80211
If everything is ok you can replug your external wireless device to load the new rtl8187 driver.[/quote]

Pero este texto no significa que tengo que actualizar initramfs o algo asi pone?, y luego en el texto inferior no dice algo de que he de borrar los modulos mac80211 cfg80211 y luego conectar el dispositivo???

Es que mi ingles es muy basico…

Hoy no tengo tiempo para esto y voy a pasear todo lo que puedo :smiley:
Leyendo en el sitio de aircrack-ng ( r8187 driver) rápido veo que, a lo mejor, hubiera tenido que balcklistear también al rtl8187
Entiendo que lo que se debe hacer es usar un viejo driver obsoleto que tenía compatibilidad hostapd (o no es esto)
Sobre tus advertencias:
La primera es para no “tener el mensage de advertencia” (linux mint)
La segunda es para “no tener que reiniciar”
Ayer he hecho la actualización del xubuntu a la versión 20.04, lo volveré a intentar pero quizá sin usar este repositorio ya que con los problemas que has tenido y que a mi no me ha ido muy bien tampoco.,
Hay que investigar un poco más.
Aprovecha el sol y disfruta de tu horario de salida :cool:

Ok yo seguiré leyendo y buscando. Si lo consigues me lo dices.
Gracias

¡Claro! Mañana (o sea hoy :smiley: ) aprovecharé las salidas y el sol del domingo y no haré nada, pero lunes me pongo en ello. Mi loopcom no va tan mal si uso un cable con dos fichas USB así que podré hacer testing.